Processing a Bend Line

In the 2D view of a part, click on a bend line to display the Bend-line dialogue to make edits.

Angle – This function is used to specify the angle of the selected line.
Radius – This function is used to specify the inner radius with which the selected line is to be bent. If the radius is changed, the bend deduction is changed as well, but the correction K Factor remains unchanged.
K-Factor – This function is used to specify the correction K Factor of the selected line. If the correction K Factor changes, the bend deduction changes as well.
Processing – This drop-down gives options on how the bend will be processed. The options are:

• Standard – This is the default setting, and the bend will use standard air-bending.
• Coining – This option can be set to define bending as coining.
• Pre-bent – This setting is used to mark the selected line as already bent. As a result, this bend will not be carried out. During the process, the ‘already bent’ bend is checked for collisions.
• Post-bend – This setting is used to mark the selected line as being handled after the press brake operation. As a result, this bend will not be carried out.

Invert – This function is used to invert the angle.
Bending Sequence – This option can be used to define a bending sequence. Tool stations and back gauges are calculated.
Delete – This function is used to delete the selected object.
Drawing – This function is used to open the Drawing glob. In this section, the fill interior can be turned on or off and the scale of the drawing can be modified.
Prev – This function is used to jump to the previous object. 
Next – This function is used to jump to the next object.
Toggle bends – This function is used to select all bending lines except the selected bending line. 
All Bends – This function is used to select all bending lines. 
Same Angle – This function is used to select all bending lines with the same angle.