Slide Back

This extraction pattern is useful in extracting parts with tall flanges that are too tall to be removed out straight even with the beam at full opening. The part goes up with the beam, then moves down slightly and is extracted by a diagonal movement (similar to the Unhook extraction, but moving backwards or towards the operator, instead of into the machine). 

Part lower – The part is lowered by this amount before the backward slide starts

Slide – The part is extracted diagonally down and forward by this amount until the top clears the bottom of the punch, and then it is removed out

Note: This extraction can be performed with the Up with Ram switch set on or off. Accordingly, you get the option to set the Part lift or the Part lower setting, before the slide-out.